6
DRILTEC, INC.
NEW
REBAR CUTTER
For use with SDS-Plus Rotary Hammers
USEABLE
REBAR-CUTTER
DIAMETER
LENGTH DESCRIPTION
PART #
1/2"
x 7-1/2" Ratio
Rebar Cutter RL-050-190
1/2"
x 16"
Ratio Rebar Cutter RL-050-420
NEW
9/16"
x 7-1/2" Ratio
Rebar Cutter RL-056-190
9/16"
x 16"
Ratio Rebar Cutter RL-056-420
NEW
5/8"
x 7-1/2" Ratio
Rebar Cutter RL-063-190
5/8"
x 16"
Ratio Rebar Cutter RL-063-420
NEW
11/16"
x 7-1/2"
Ratio Rebar Cutter RL-069-190
11/16"
x 16" Ratio
Rebar Cutter RL-069-420
NEW
3/4"
x 7-1/2" Ratio
Rebar Cutter RL-075-190
3/4"
x 16"
Ratio Rebar Cutter RL-075-420
NEW
7/8"
x 7-1/2" Ratio
Rebar Cutter RL-088-190
7/8"
x 16"
Ratio Rebar Cutter
RL-088-420
NEW
1"
x 7-1/2"
Ratio Rebar Cutter
RL-100-190
1"
x 16"
Ratio Rebar Cutter
RL-100-420
NEW
1-1/8"
x 7-1/2"
Ratio Rebar Cutter RL-113-190
1-1/8"
x 16" Ratio
Rebar Cutter RL-113-420
NEW
1-1/4"
x 7-1/2"
Ratio Rebar Cutter RL-125-190
1-1/4"
x 16" Ratio
Rebar Cutter RL-125-420
NEW
SDS Plus Adapter
RA-030-030
NEW
The Revolution in
Cutting Concrete
Embedded Rebar!
• Uniquely durable and aggressive
carbide tips.
• Use with engaged hammer action;
Continuous drilling without change of
drill mode!
• Integrated ejection support for
removal of reinforcement from drill
body.
NOTE: Consult with structural design engineer/
architect before drilling rebar!
1. Drill with regular rotary hammer drill bit until rebar is
encountered. Stop drilling. Remove drill bit. DO NOT
CLEAN HOLE.
2. For drilling through rebar insert Rebar-Cutter into rotary
hammer. Use rotary hammer mode. When finished
remove Rebar-Cutter.
3. Continue drilling with regular rotary hammer drill bit.
The use of Rebar Cutter in SDS-Max or Spline hammers voids all warranties.
SDS-Plus Adapter
