16
DRILTEC, INC.
Special tungsten carbide tips with 130°
tip angles. To take on hardest hitting
rotary hammers. To wear down tough-
est aggregate.
Most rigid joints through copper-silver
brazing. Carbide is totally embedded in
both sides of the steel body.
Patented super-U double flute and
super tough double coil flute on larger
diameter bits 3/4 up. Fastest and
most efficient dust removal.
Annealed, shop-peened chrom, nickel,
molybdenum steel to prevent prema-
ture fatigue failures.
Industrial finish.
Bit diameters meet ANSI standards.
NEW LARGE
SNAP LOCK ADAPTER
A great new addition to our Adapter
accesories. The sturdy design and
tight fitting tolerances allow for use in
the hardest hitting hammers. Please
note: You can also use old style TE
bits in large large Spline Shank Snap
Lock Adapter.
A-TAPER BITS
USEABLE
TOTAL
PART
DIAM.
X LENGTH
X
LENGTH
NUMBER
3/16"
x 1-3/4 x
3-1/2
AB-051-051
*
1/4"
x
2-1/2 x 4
AB-052-052
*
1/4 x 4
x 6
AB-053-053
5/16 x 4
x 6
AB-055-055
*
3/8
x 4 x 6
AB-056-056
*
3/8
x 6
x 8
AB-057-057
3/8
x 10
x 12
AB-058-058
*
3/8 x
14 x 16
AB-059-059
1/2 x 4
x 6
AB-061-061
*
1/2 x
6-1/2 x
8-1/2
AB-062-062
1/2
x 10
x 12
AB-063-063
*
1/2 x
14 x
16
AB-064-064
*
5/8
x 4 x 6
AB-066-066
*
5/8 x
6-1/2
x 8-1/2
AB-067-067
5/8 x
10 x 12
AB-068-068
*
5/8
x 14 x
16
AB-069-069
*
3/4
x 6-1/2 x
8-1/2
AB-071-071
*
3/4 x
10 x 12
AB-072-072
*
3/4 x
14 x
16
AB-073-073
*
7/8 x
7-1/2 x
9-1/2
AB-075-075
*
DESCRIPTION
PART #
SDS-Plus
AH-201-201
SPLINE SHANK
AH-198-198
SDS-Max
AH-199-199
DRIFT KEY (ROUND)
AH-211-211
DESCRIPTION
PART #
SPLINE to SDS-MAX BITS
AH-223-223
SDS-MAX to SPLINE BITS
AH-231-231
DESCRIPTION
PART #
SPLINE SHANK
AH-222-222
SDS-Top
AH-222-225
SDS-Max
AH-230-230
WACKER HEX
AH-245-245
A-TAPER ADAPTERS
(FOR USE WITH A-TAPER BITS)
LARGE SNAP LOCK ADAPTERS
(FOR USE WITH SPLINE OR MAX BITS)
SNAP LOCK ADAPTERS
(FOR USE WITH SDS-Plus BITS)
A-TAPER
*
Whi le Q uantiti es Last
